MultiCyclone is a pre-filtration device that is capable of saving water and reducing filter maintenance. The MultiCyclone works on the basis of centrifugal water filtration. There are no moving parts to wear and tear, and no filter media to clean or replace. MultiCyclone is ideal as a pre-filter, extending the life of your existing filter and cutting water consumption as it eases the workload on your swimming pool filter.
- MultiCyclone pre-filters up to 80% of the filter's incoming dirt load easing the workload of the swimming pool filter.
- As the MultiCyclone intercepts more and more dirt, the flow rate remains unchanged.
- Improving pool water circulation
- Enhancing the performance of the automatic pool cleaner and in floor cleaning system
- Allowing effective pool vacuuming without burdening the pool filter
- Minimising filter maintenance and saving water
Incoming water is guided by a diverter plate so that it enters multiple hydro cyclones tangentially, generating a strong centrifugal effect. This spins the sediment out to the hydro cyclone's wall and then spirals it down to the sediment sump, while the cleansed water spirals upwards. The accumulation of sediment can be visibly monitored through the Multi Cyclone's clear sediment pump. It is cleared by simply opening the purge valve. Only 15 litres of water is discharged to clean the unit of sediment.
The Multi Cyclone is ideal as a pre-filter to extend the life of your existing filter. The filtration efficiency of the Multi Cyclone was tested by feeding 5 to 80 micron dust particles through the Multi Cyclone and analyzing the percentage of dust particles trapped in the sediment bowl. The laboratory test revealed that the Multi Cyclone was effective in filtering particles sized 40 to 80 microns.
The unit works together with a sand, cartridge, bead or DE filter to polish the water. It allows the installation of finer filtration systems, such as cartridge filters with finer cartridges and the sand filters with finer filter media. The water ends up clearer with less up keep.
The unit is supplied with both 2"/63mm quick connect unions making this unit ideal for new installations and retrofit market. Minimum flow is 3m3/h, max. flow is 30m3/h. Max. pressure is 4 bar. The Multi Cyclone must be installed after the pump.
Swimming Pool and Spa Association (SPASA) most innovative product award 2008
Waterco's MultiCyclone centrifugal pre-filter has been awarded SPASA NSW, SPASA SA & SPASA QLD most innovative product award. The Swimming Pool & Spa Association (SPASA) is a non-profit organisation dedicated to maintaining and improving standards within the industry for the betterment of consumers, pool builders and suppliers. SPASA's panel of independent judges awarded Waterco's MultiCyclone centrifugal filter for its water saving features and its innovative method of filtering sediment without any filter media or moving parts.
The MultiCyclone has been certified by NSF international; NSF tested the MultiCyclone for its structural integrity, head loss, turbidity removal, and clean ability. Its turbidity tests proved that the MultiCyclone was capable of filtering down to 30 microns. NSF International is a not-for-profit the world leader in standards development, product certification, education, and risk-management for public health and safety. The NSF Mark is recognized for its value in international trade around the world and is respected by regulatory agencies at the local, state, and federal levels.