Used to Square the Top Edge of Fiberglass Pools (Fiberglass)
Stegmeier's solution for setting our forms on one piece fiberglass pools. The plumb strip squares the top edge of the fiberglass pool shell making it easier to set the forms "plumb".
Flexibility
Stegmeier's forms conform easily to most free-form designs but can be bent to a tight radius using the bending tape provided.
Plumb Strips are PVC corner strips used to square the top edge of a fiberglass pool (one piece) in preparation for setting a Cantilever
form. Plumb Strips are installed using the self-tapping screws provided. Tighter radii may be formed by adding additional relief cuts
making Plumb Strip adaptable to virtually any pool or step configuration.
Quantity
- 14 Intermediate Plumb Strip Form (8' lengths)
- 14 Plumb Strip (8' lengths)
- 1 Tie Wire Side Kit
- 1 Instruction Sheet
PACKAGED 112’ PER CARTON 8’ LENGTHS, INCLUDING SELF TAPPING SCREWS