DESCRIPTION
DECK-O-SHIELD PLUS is a premium-grade, ready-to-use,
water-based sealer formulated for use on natural stone. DECK-O-SHIELD
PLUS is formulated specifically to seal porous surfaces and is ideal to
use on pool copings and decks protecting them from salt penetration. It
can be used on all porous surfaces such as natural stone, tile,
concrete, pavers, and grout. DECK-O-SHIELD PLUS provides a solution to
spalling and pitting of porous stone and concrete surfaces caused by
salt penetration as well as spalling caused by freeze-thaw cycles.
USES
DECK-O-SHIELD PLUS weatherproofs and protects virtually all porous
surfaces, including decks, porches, patios, and walkways around pools.
This includes the following surfaces: natural stone, mortar joint,
concrete, brick, concrete block, stucco.
Another advantage DECK-O-SHIELD PLUS provides is that the product
will not alter the color or tint of the surface after application.
There is no need for worry when applying DECK-O-SHIELD PLUS, because the
product will have no adverse effects on surface appearance after
application.
Specifications: - Complies with all current federal, state, and local maximum allowable VOC requirements, including U.S. EPA, SCAQMD, and OTC.
Features/Benefits:
- DECK-O-SHIELD PLUS is not a film-forming material – it penetrates the
surface to form an integral barrier to moisture penetration.
- Transparent, non-staining.
- High solids content; one-coat application on most surfaces.
- Surface appearance after application and complete drying is virtually unchanged.
- Reduces entrapment of dirt particles and other contaminants that cause discoloration; inhibits soiling.
- Protects against efflorescence and rust staining.
- Helps resist stains from spills.
- Protects against salt staining and “whitening” caused by salt in the water.
- Water-based, VOC compliant.
- One component.
- USDA accepted.
Properties:
Dry to Touch 1 – 2 hours (Typical)
Allow 12 -14 hours between coats for multiple coat applications
Flash Point >210° F
Color Milky White Emulsion