Builder Series bowls combine a complete fire pot with a scupper style spout of water. In this design a fire media pan sits at the top of the bowl. Water flows under the pan and out an extended lip at the front of the bowl.
Bobe bowls are hand constructed by skilled artisians.
Each bowl is built from heavy grade material, fully TIG welded and polished.
Features
- Perfect flame burner
- Bonding: All water +fire bowls come with a bonding lug on the bottom
- Copper will naturally patina. The patina protects the metal and creates a unique color and style for every
installation
- All Builder Series bowls have a 1.5in female threaded inlet, constructed of 316 Stainless steel
- The inside bottom of bowl is open for gas and electrical
- Bottom measurement is equal to 1/2 bowl width (Ex: 24" bowl has 12" base)
- Manual fire pot includes: Perfect Flame burner, Media pan, Key valve kit, Valve, Key, Flange. Street Elbow, 12"
Nipple, Reducer, Air mixer (propane only), Built-in vent collar
- Heavy Grade Material, Double-Walled and Fully TIG Welded
- Size Guide & Flow Rate Chart Below
24"Wx7"W |
24"Wx12"W |
28"Wx12"W |
32"Wx12"W |
36"Wx16"W |
Description |
Ok |
Ok |
Ok |
Ok |
Ok |
Square Manual Ignition |
- |
- |
- |
Ok |
Ok |
Square Auto Ignition |
Ok |
Ok |
Ok |
Ok |
Ok |
Round Manual Ignition |
- |
- |
- |
Ok |
Ok |
Round Auto Ignition |
Flow Rates
15 - 20 GPM - 24" x 7", 24" x 12", 28" x 12"
20 - 25 GPM - 32" x 12", 36" x 16"
Spillway Lip Size (L) |
24" |
28" |
32" |
36" |
10" wide |
11" wide |
12" wide |
14" wide |
Note: Pots should be installed with drainage for rain water. Lack of drainage can flood gas lines and requiere service. A cover is recommended for winter or periods of non-use.