Grizzly 20
Grizzly Coolers Heavy Duty construction are the perfect equipment for Hunting, Camping, Tailgating or Fishing. They offer the ultimate safekeeping, security and cooling. Each of the Grizzly Coolers has been fully tested for ice retention, and we believe our products exceed the levels set by other coolers. If you need a cooler that will keep things cold for the long journeys, the extended trips, and those intensely heated adventures, then Grizzly Coolers are the ones you need.
Features
- 20 quart capacity
- 16 lbs empty
- RotoTough rotationally molded construction
- Environmentally friendly pressure-injected insulation
- Molded-in hinge with stainless steel pin
- 2" drain plug for easy, quick draining
- Full length drain channels for complete draining
- BearClaw Latches require no hardware and keep a secure grip
- Non-slip non-marking rubber feet
- Molded-in heavy duty handles
- Rope Handle with nylon sleeved rubber handle
- 2" Tiedown slots
- Embossed 17" ruler on lid
- Rubber Gasket makes a perfect seal
- Includes dry goods tray
- Made in USA
- IGBC Bear Resistant Certification 3725*
*This product was subjected to and successfully passed the IGBC live bear testing protocol. This means the product meets minimum IGBC bear-resistant design and structural standards, but is not a guarantee that a bear cannot gain entry into this product.
Capacity |
Dimensions |
Lbs of Ice |
12 oz. Cans |
Length |
Width |
Height |
Inside Depth |
Inside Length |
Inside Width |
05 |
24 |
20 1/4" |
14 1/2" |
14 1/4" |
10 1/4" |
14 1/4" |
9 1/4" |
Grizzly Coolers are made to be the toughest, highest-quality coolers on the market. We put our coolers through their paces to ensure that we are providing the highest quality products to our consumers. We have attained Bear Proof Certification for our coolers, where our coolers were able to stay sealed after being attacked by bears for over an hour. In addition to IGBC Testing, we have also run our own stress tests to ensure that the cooler will retain its shape, look, and functionality through even the most extreme conditions.
That toughness goes deep into our coolers as well. Our coolers keep what's on the inside safe as well. Coolers can take a beating from the sun and heat as well, and our coolers have been put to the test there as well. We hold our work to the highest standard so we can provide the strongest, most durable, most usable, and most effective coolers possible.
Keep Your Cooler Cold
Grizzly Coolers aren't only protective against the animals in the wilderness; they are protective against the heat of the sun as well. Our coolers have gone through extensive testing to make sure they hold ice the longest, and in the most extreme conditions. Each of the Grizzly Coolers has been fully tested for ice retention, and we believe our products exceed the levels set by other coolers. If you need a cooler that will keep things cold for the long journeys, the extended trips, and those intensely heated adventures, then Grizzly Coolers are the ones you need.
Testing Process; 90 degree climate controlled room and the cooler is filled with cubed ice. The cooler is opened twice a day to monitor the ice levels, frequency is increased as the ice is closer to being melted.
G15 - 4 Days, 5 Hours
G20 - 5 Days, 3 Hours
G40 - 6 Days, 14 Hours
G60 - 8 Days, 6 Hours
G75 - 9 Days, 10 Hours
G150 - 11 Days, 4 Hours
G400 - 19 Days, 10 Hours
Roto-Molded Coolers
Grizzly Coolers are made of rotationally molded plastic, which allows us to make our coolers strong and provide optimum performance.The rotomolding process makes sure that each part has a consistant wall thickness and is free of imperfections, and that the products we deliver will hold up to the toughest abuse.
IRP has been working with roto-molded plastics since 1983. IRP’s Engineering and Research & Development department is proficient in all molding executions. We design, test, create, and use all of our own products, to ensure that we have the best products available. Our Grizzly Coolers line showcases that ability, which comes with nearly three decades of experience in rotomolding plastics.
Grizzly vs. Yeti
Grizzly
|
Feature |
Yeti |
USA - Decorah IA (By Grizzly) |
Manufacturing |
Outsourced |
Lifetime Warranty |
Warranty |
5 Year Warranty |
5 * |
Standard Colors* |
3* |
2" With Slooped Drain Channel |
Drain |
1" |
Stainless Steel |
Hinge Pin |
Aluminum |
Bear Claw Latch (no hardware) |
Latches |
T Latch (uses pins) |
Yes |
Non-Skid Feet |
Yes |
Yes |
Embossed Ruler on Lid |
No |
Yes |
Grizzly Bear Certified (IGBC) |
Yes |