ICT Stone Show H2O Invisible is a clear drying water-repellent that will not change the substrate's color properties. Stone Show H2O Invisible has been specially formulated to be the ideal option for natural stones that must allow moisture to escape without allowing moisture the reenter through the non-filmforming barrier created by the proper installation of Stone Show H2O Invisible. By disallowing the penetration of moisture, Stone Show H2O Invisible will also help against other complications cause by the presence of water such as efflorescence, staining, spalling, and some cracking. Stone Show H2O Invisible does not create a film over the surface and will not make the surface any more slippery than before application of Stone Show H2O Invisible. Stone Show H2O Invisible will keep surfaces beautiful and protected. Longevity, which is typically around 12-24 months, will be determined by the amount of Stone Show H2O Invisible that is absorbed into the substrate.
Features & Benefits
- Water beading
- Stain resistance
- Low V.O.C.
- Efflorescence resistance
- One-way water repellent
- Easy maintenance
- Inhibits bio growth
- Non film forming
ICT Stone Show H2O Invisible is a breathable, water-based, penetrating, water repellent designed to be used on natural stones, concrete, and other properly prepared masonry surfaces. Stone Show H2O Invisible acts as a protective shield against staining, simplifies maintenance & cleaning, and disallows deterioration of the substrate caused by water presence & contaminates carried by water, however, Stone Show H2O Invisible does not change the color characteristics of the substrate being treated. If color enhancement is desired, use Stone Show H2O Enhancer (170) instead.
Coverage rates will vary depending on substrate, textures, porosity, and application methods.
- Porous, Textured Surfaces - 75-125 sq. ft. per gallon
- Semi-Porous Surfaces - 100-200 sq. ft. per gallon
- Dense, Smooth Surfaces - 200-400 sq. ft. per gallon
Clean up & Storage
ICT Stone Show H2O Invisible cleans up easily with soap and water . Once material is dry, material cannot be removed. Product should be stored in a cool dry environment. Do not leave in direct sunlight. Keep from freezing.