This general purpose 24-hour, 7-day timer control is capable of automatically switching loads according to a preset daily schedule. Simply wire to various downstream hard-wired pool equipment and turn these loads On and Off via schedule or manually through the Intermatic Connect Mobile App or Voice command.

 

• Schedule automatic ON/OFF operation of connected Pool equipment and make changes anywhere to suit your scheduled needs.
• Controls pool pumps, pool and spa lighting, landscape lighting, pool sanitation, and other auxiliary equipment; Up to 96 ON/OFF events per day.
• Simple retrofit knockout locations and sizes designed equivalently to Intermatic legacy time switch enclosures.
• Remote access once connected to a WiFi network, the PE700 series can be accessed via the Intermatic Connect app from any location.
• Override inputs remotely extend or override active schedules at any time with a switch, photocontrol, presence sensor or via the Intermatic Connect app.
• Auto voltage automatic input voltage selection from 120 VAC to 277 VAC, 50/60 Hz.
• Configurable relay outputs for multiple switching options SPDT or DPDT.
• Service mode with optional timed-stop or timed-run feature. Locks external users out from controlling connected loads remotely.
• LED Status Indicators provides visual cue to indicate the devices current state and connection status.
  Non-volatile EEPROM memory protects programing indefinitely. 
   

If within the warranty period specified, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or reinstallation costs.