Raypak 106A Above Ground Analog Propane Gas Pool & Spa Heater | 105K BTU | Altitude 0-1999 Ft | Electronic Ignition | P-M106A-AP-C 014799 | P-D106A-AP-C 014817 | P-R106A-AP-C 014781

$1,999.00

Raypak 106A Above Ground Analog Propane Gas Pool & Spa Heater | 105K BTU | Altitude 0-1999 Ft | Electronic Ignition | P-M106A-AP-C 014799 | P-D106A-AP-C 014817 | P-R106A-AP-C 014781

Raypak 106A Analog Propane Gas Pool & Spa Heater 105,000 BTU

The Raypak 106A 105,000 BTU Analog Propane Gas Heater is a compact yet powerful heating solution designed specifically for above ground pools and spas. Built with the same commercial grade engineering used in larger Raypak heaters, the 106A delivers dependable performance, durable construction, and easy operation in a space saving design. Whether you are looking to extend your swim season, heat your spa quickly, or open your pool earlier in the spring, this propane powered heater provides consistent and reliable heating when you need it most.

Model	P-R106A-AP-C
Series	Raypak 106A
Fuel Type	Propane Gas
BTU Input	105,000 BTU
Control Type	Analog
Voltage	120V or 240V
Water Connection Size	2 Inch
Stack Diameter	6 Inch
Application	Above Ground Pools & Spas
Installation Type	Outdoor (Indoor with proper venting)

Important Installation Notes

Not designed for Low NOx emission areas.
Reduce input rating by 4 percent for every 1,000 feet above 2,000 feet elevation.
Requires external power source for ignition system.
Designed primarily for outdoor installation.

Features

Durable PolyTuf Powder-Coated Cabinet

The PolyTuf textured polyester powder coating provides superior corrosion resistance compared to traditional solvent or waterborne finishes. Each cabinet panel undergoes a 7-stage wash process for maximum paint adhesion. Beneath the finish, galvanized steel enhances rust protection for long-lasting outdoor durability.

Wind-Resistant Outdoor Design

Designed to draft naturally without the need for fans, the low-profile cabinet protects against wind, rain, leaves, downdrafts, sleet, and snow. This allows for reliable heating performance in outdoor installations under normal operating conditions.

All-Copper-Fin-Tube Heat Exchanger

The integral-fin copper tubing maximizes heat transfer efficiency. Thick stainless steel tube sheets provide structural strength and corrosion resistance, helping ensure years of dependable operation.

Polymer Header Design

Polymer headers help prevent rust staining and extend the life of the heater by resisting corrosion caused by pool and spa water chemistry.

Built-In Automatic Bypass

The factory-installed water bypass maintains consistent flow through the heat exchanger across varying GPM rates. This helps reduce condensation from cold water and supports efficient performance.

Stainless Steel Burner Tray

Constructed with a stainless steel burner deck and aluminized metal components in heat-sensitive areas. The tray is designed for easy removal to simplify servicing and maintenance.

Ceramic Fiber Combustion Chamber

The insulated fire tile combustion box increases efficiency while keeping the outer jacket cooler. It also reduces residual heat after shutdown.

Simple Analog Controls

Features an easy-to-use analog dial thermostat. The electronic ignition system operates on 120V or 240V power and generates a pilot only when there is a call for heat. Includes a 3-foot, 3-prong power cord.

2 Inch Water Connections

Includes 2 inch flange connections for secure and straightforward installation.

Brand: Raypak

REVIEWS

Q&A

PARTS

Raypak 106A Above Ground Analog Propane Gas Pool & Spa Heater | 105K BTU | Altitude 0-1999 Ft | Electronic Ignition | P-M106A-AP-C 014799 | P-D106A-AP-C 014817 | P-R106A-AP-C 014781

$1,999.00

Gas Type:

Propane

Natural Gas

Propane

Elevation:

0-1999'

Quantity

Platinum Preferred Manufacturer

Purchase options

Product description

Raypak 106A Analog Propane Gas Pool & Spa Heater 105,000 BTU

Model	P-R106A-AP-C
Series	Raypak 106A
Fuel Type	Propane Gas
BTU Input	105,000 BTU
Control Type	Analog
Voltage	120V or 240V
Water Connection Size	2 Inch
Stack Diameter	6 Inch
Application	Above Ground Pools & Spas
Installation Type	Outdoor (Indoor with proper venting)

Important Installation Notes

Not designed for Low NOx emission areas.
Reduce input rating by 4 percent for every 1,000 feet above 2,000 feet elevation.
Requires external power source for ignition system.
Designed primarily for outdoor installation.

Features

Durable PolyTuf Powder-Coated Cabinet

Wind-Resistant Outdoor Design

All-Copper-Fin-Tube Heat Exchanger

Polymer Header Design

Polymer headers help prevent rust staining and extend the life of the heater by resisting corrosion caused by pool and spa water chemistry.

Built-In Automatic Bypass

The factory-installed water bypass maintains consistent flow through the heat exchanger across varying GPM rates. This helps reduce condensation from cold water and supports efficient performance.

Stainless Steel Burner Tray

Constructed with a stainless steel burner deck and aluminized metal components in heat-sensitive areas. The tray is designed for easy removal to simplify servicing and maintenance.

Ceramic Fiber Combustion Chamber

The insulated fire tile combustion box increases efficiency while keeping the outer jacket cooler. It also reduces residual heat after shutdown.

Simple Analog Controls

2 Inch Water Connections

Includes 2 inch flange connections for secure and straightforward installation.

Features and details

Specifications

Resources

Warranty

Raypak, Inc. (“Raypak”) warrants to the original owner that the below model pool and spa heater (the “Heater”) when installed in the contiguous 48 states of the United States of America with a pool or spa by a properly licensed installer will be free from defects in materials and workmanship under normal use and service for the Applicable Warranty Period. The foregoing warranty will extend to subsequent owners solely as required by applicable state law. Under this Limited Warranty, Raypak will, at its option, repair or furnish a replacement for any defective part of the HEATER. The repair or replacement will be warranted for only the unexpired portion of the original Applicable Warranty Period (as defined below).

MODELS	WARRANTY PERIOD
AVIA Standard Models with copper heat exchanger: 264, 404	Two (2) years following the Effective Date for parts and labor.
AVIA HD Models with NiTek heat exchanger: 264, 404	Two (2) years following the Effective Date for parts and labor. Notwithstanding the foregoing, the NiTek heat exchanger is warranted for three (3) years following the Effective Date for parts and labor.
Pool and Spa Heater Models: 106A, 156A, 206A, 266A, 336A, 406A, 207A, 267A, 337A, 407A*	Two (2) years following the Effective Date for parts and labor.
ASME Pool and Spa Heater Models: 206A, 266A, 336A, 406A, 207A, 267A, 337A, 407A	One (1) year following the Effective Date for parts and labor.
Professional Pool and Spa Heater Models: Professional digital heaters 268A, 408A, SR-410	Three (3) years following the Effective Date for parts and labor.
Heat Pump Pool Heater Models: 2450, 3450, 4450, 5450, 6450, 8450, TWPH 4550, 5550, 6550, 6550EHC, 8550, & 8550EHC and Professional Series PS- 9350ti, PS9353ti, PS10353ti, PS10354ti, PS10355ti	Two (2) years following the Effective Date for labor and seven (7) years following the Effective Date for parts. Notwithstanding the foregoing, the titanium tube component of the titanium heat exchanger is warranted for ten (10) years following the Effective Date for parts and two (2) years following the Effective Date for labor.
Crosswind Heat Pump Pool Heater Models: 30-I, 40-I, 50-I, 65-I	Two (2) years following the Effective Date for labor and seven (7) years following the Effective Date for parts. Notwithstanding the foregoing, the titanium tube component of the titanium heat exchanger is warranted for ten (10) years following the Effective Date for parts and two (2) years following the Effective Date for labor.
E3T Single-Phase Pool and Spa Heater Models: 0005, 0011, 0018, 0027 E3T 3-Phase Commercial Pool Heater Models: 0018, 0024, 0030, 0045 and 0054	One (1) year following the Effective Date labor and parts. Notwithstanding the foregoing, the electrical heating element of the Heater is warranted for only ninety days (90) following the Effective Date.

* THIS WARRANTY PERIOD IS NOT AVAILABLE FOR HEATERS INSTALLED ANYWHERE OTHER THAN A SINGLE-FAMILY RESIDENTIAL DWELLING, AS THIS HEATER IS NOT INTENDED FOR COMMERCIAL INSTALLATION.

See product warranty for specific details. Conditions apply. To register your product or to make a claim, please visit www.raypak.com/warranty.

This information was updated on 7/14/23. For the most current information and full warranty policy please visit www.raypak.com.

Warranty Information

REVIEWS

Q&A

PARTS