Product description

PoolEye(TM) alarms are equipped with the most advanced pool alarm technology available subsurface wave detection. PoolEye(TM) alerts you to accidental falls into the pool and unwanted pool intrusion while eliminating false alarms from wind, rain, falling leaves, etc. It detects objects weighing 15 lbs or more entering the pool, and all models feature adjustable sensitivity. A PoolEye(TM) alarm is an essential addition to any pool safety program.

All aboveground pool models monitor pools up to 24' round or 16' x 32' oval*. The PoolEye(TM) PE12 is the standard aboveground pool model, and the PE13 for aboveground pools is equipped with both poolside and in-home remote alarms.

All inground PoolEyes(TM) monitor pools up to 18' x 36'*. The PE20 is PoolEye's(TM) standard inground pool alarm and the PE21, also for inground pools, comes with both poolside and in-home remote alarms and a poolside air/water temperature monitor. In addition to subsurface wave detection technology, the PoolEye(TM) PE22 for inground pools features an added layer of protection Infrared "Night Vision", which monitors the pool area. The PE22 also comes equipped with an in-home remote alarm that alerts you with human voice announcements and/or siren, depending on the level of intrusion.



Features
Uses subsurface wave detection technology - the most accurate pool intrusion detection available
Affordable and easy to install
Features in-home remote receiver
Patented sub-surface propagation wave detector
Eliminates false alarms due to wind, rain, etc.
Detects objects 15 lbs or more
120 dB alarm siren (stainless steel speaker)(95 dB at 10ft.)
ETL-listed to UL 464
Child-proof ON/OFF switch with audio indicator
Built-in RF channel A or B select
Remote receives signal up to 100' away
Remote can be connected to a home security system
Automatic low battery check - chirps every 60 seconds
Recommended for pools up to 24' round or 16' x 32' oval (larger pools require an additional alarm)
Automatic reset in 3 minutes
Power check test button
Sensor mounts under top ledge / siren mounts on top ledge
Water-resistant/weatherproof construction
Poolside alarm operates on one 9 Volt battery (not incl.)
Remote receiver operates on UL/CSA listed AC adapter
Remote features 9-Volt battery back up
(battery not incl.)
Bilingual installation/operation manual (English/French)
Bilingual 4-color box (English/French)

Features and details

• For aboveground pools, with remote receiver
  

Resources

Product Manual

Warranty

REVIEWS

Q&A