The Ultimate Spa Experience
Improving your spa experience with mineral technology that not only makes your spa sparkle like never before it feels better and provides a healthier bathing environment for you and your family.
In stock ships within 24 hours. SpaRX has come up with a unique and amazing mineral formulation and rejuvenation process harnessing the best nature has to offer in eliminating algae and bacteria naturally. This mineral formula is the most effective algaecide there is against any type of algae.
There are two parts to this product
¬ÂMinerals in the water
¬ÂMetallic rod
Minerals in the water
Spa has packed 2 oz of the minerals into the middle of the rod. This is enough minerals for a 1000 gallon spa. If your Spa is larger than that simply add additional SpaRX.
Metallic Rod
The rod in the blue cage is a specially treated alloy that has rejuvenating abilities on the copper, silver and zinc minerals. Allowing these minerals to continually defend and attack algae and bacteria in the spa 24hrs a day, 7 days a week and lengthening the replacement time to 4 to 6 months. Yes that¬„s right! The SpaRX unit only need to be replaced every 4 to 6 months.
Where do I install it?
Simply Place the SpaRX blue cage unit into the skimmer or between the filter cartridges. Where ever it gets the best water flow over it.
What happens when I place the unit in the skimmer or between the cartridge filters?
The blue caged SpaRX unit should be placed in the skimmer at the beginning of the filter cycle. This will give the minerals time to dissolve and get through the filter into the spa water where the minerals need to be. The minerals go out into the whole volume of water and form a stable residual, allowing the minerals to eliminate algae and bacteria where ever they are in the water. These minerals are totally effective against algae and bacteria but totally harmless to bathers.
How often do I replace the unit?
The unit needs to be replaced every year every 4 to 6 months. If not, the treated metallic rod over the 6 months gets oxidized and calcified so when the minerals pass back over it they do not get the ion exchange between the minerals and the rod.
Why such a big variance, 4 to 6 months?
Every spa is different. Some spas need more sanitizing than others. High bather load, leaves and debris, dogs swimming, algae bloom and bad circulation all contribute to how hard the minerals work.
3 easy steps
Step 1
Drain spa, Clean filter and add fresh water.
Step 2
Place the SpaRX unit in the skimmer or between
the filter cartridges.
Step 3
Choose you oxidizer
SpaRX- oxidizer add 2 oz per 500 gallons once
per week or after bathing.
Low Chlorine- 1 tab per 500 gallons
or
1 oz di-chlor once per week or after heavy
bather load
Normal Spa chemistry required
PH 7.2 to 7.8
Alkalinity 80-120
Chlorine 0.5ppm
The spa still needs regular maintenance, cleaning,
check and balance water chemistry, filter
cleaning etc.