Pros: Great form, worked well for our fiberglass pool, the forms came off really well during removal.
Cons: Bending tap was not very good, we ended up using gorilla tape on the inside and outside of the form for bends, this allowed us to bend the form onto itself with minimal breakage. They gave us nails instead of screws and the plumb strips were for a vinyl lined pool not fiberglass so we did not use them.
BEST ANSWER:It comes equipped for vinyl liner pools as it has nails and a vinly plumb strip not a fiberglass one. Shorter plumb strip is useless on fiberglass pool.
BEST ANSWER:It comes equipped for vinyl liner pools as it has nails and a vinly plumb strip not a fiberglass one. Shorter plumb strip is useless on fiberglass pool.
BEST ANSWER:We ended up using gorilla tape on the inside and outside of the form, this allowed us to bend it in on itself without breaking the Styrofoam.
BEST ANSWER:We ended up using gorilla tape on the inside and outside of the form, this allowed us to bend it in on itself without breaking the Styrofoam.
BEST ANSWER:the forms have an adhesive tape strip that adhere the form to the side of the pool but when the concrete is poured, it puts too much pressure on the top part of the form. you use the wire ties to anchor the top part of the form prior to pouring. the concrete is poured right over the anchored wire ties, then the wire ties are broken off. pretty simple concept. i would say, however, that you really need someone who knows what they are doing to do a really good job.
BEST ANSWER:the forms have an adhesive tape strip that adhere the form to the side of the pool but when the concrete is poured, it puts too much pressure on the top part of the form. you use the wire ties to anchor the top part of the form prior to pouring. the concrete is poured right over the anchored wire ties, then the wire ties are broken off. pretty simple concept. i would say, however, that you really need someone who knows what they are doing to do a really good job.
Wire ties with stops on the end. They push through the styrofoam and wrap around screws placed in the fiberglass apron of the pool. This stops the forms from bulging when concrete is poured.
Stegmeier 8' Capstone Form White with Tie | 14 per Case | 9CF112... Do you have this in stock?
A shopper
on Jul 1, 2021
BEST ANSWER:The best way to check our current stock is to call in to one of our representatives at (888) 836-6025 Our customer service team is available Monday - Saturday 6am-6pm (Central Time). You are also able to send a message to our customer service team and they will get back to you as soon as they can: https://www.poolsupplyunlimited.com/contact. Thank you.
BEST ANSWER:The best way to check our current stock is to call in to one of our representatives at (888) 836-6025 Our customer service team is available Monday - Saturday 6am-6pm (Central Time). You are also able to send a message to our customer service team and they will get back to you as soon as they can: https://www.poolsupplyunlimited.com/contact. Thank you.
I'm applying this to a pool it has a liner in the track already will this coping work and if so do you cover ?the white track that's along the top of the steel wall with the bottom edge of the styrofoam coping????
Pros: Great form, worked well for our fiberglass pool, the forms came off really well during removal.
Cons: Bending tap was not very good, we ended up using gorilla tape on the inside and outside of the form for bends, this allowed us to bend the form onto itself with minimal breakage. They gave us nails instead of screws and the plumb strips were for a vinyl lined pool not fiberglass so we did not use them.
BEST ANSWER:It comes equipped for vinyl liner pools as it has nails and a vinly plumb strip not a fiberglass one. Shorter plumb strip is useless on fiberglass pool.
BEST ANSWER:It comes equipped for vinyl liner pools as it has nails and a vinly plumb strip not a fiberglass one. Shorter plumb strip is useless on fiberglass pool.
BEST ANSWER:We ended up using gorilla tape on the inside and outside of the form, this allowed us to bend it in on itself without breaking the Styrofoam.
BEST ANSWER:We ended up using gorilla tape on the inside and outside of the form, this allowed us to bend it in on itself without breaking the Styrofoam.
BEST ANSWER:the forms have an adhesive tape strip that adhere the form to the side of the pool but when the concrete is poured, it puts too much pressure on the top part of the form. you use the wire ties to anchor the top part of the form prior to pouring. the concrete is poured right over the anchored wire ties, then the wire ties are broken off. pretty simple concept. i would say, however, that you really need someone who knows what they are doing to do a really good job.
BEST ANSWER:the forms have an adhesive tape strip that adhere the form to the side of the pool but when the concrete is poured, it puts too much pressure on the top part of the form. you use the wire ties to anchor the top part of the form prior to pouring. the concrete is poured right over the anchored wire ties, then the wire ties are broken off. pretty simple concept. i would say, however, that you really need someone who knows what they are doing to do a really good job.
Wire ties with stops on the end. They push through the styrofoam and wrap around screws placed in the fiberglass apron of the pool. This stops the forms from bulging when concrete is poured.
Stegmeier 8' Capstone Form White with Tie | 14 per Case | 9CF112... Do you have this in stock?
A shopper
on Jul 1, 2021
BEST ANSWER:The best way to check our current stock is to call in to one of our representatives at (888) 836-6025 Our customer service team is available Monday - Saturday 6am-6pm (Central Time). You are also able to send a message to our customer service team and they will get back to you as soon as they can: https://www.poolsupplyunlimited.com/contact. Thank you.
BEST ANSWER:The best way to check our current stock is to call in to one of our representatives at (888) 836-6025 Our customer service team is available Monday - Saturday 6am-6pm (Central Time). You are also able to send a message to our customer service team and they will get back to you as soon as they can: https://www.poolsupplyunlimited.com/contact. Thank you.
I'm applying this to a pool it has a liner in the track already will this coping work and if so do you cover ?the white track that's along the top of the steel wall with the bottom edge of the styrofoam coping????
Phone Support (Central Time)
6am - 6pm Monday - Saturday
NEWSLETTER
ABOUT THE STORE Pool Supply Unlimited is an e-commerce company that loves water. We love to pump it, filter it, heat it, chlorinate it, light it up and stare at it while we're barbequing a fat, juicy steak. There are real pool professionals working here. Our guys have seen thousands of pools in their careers, no exaggeration. We are based in San Antonio, TX and can land most products to your door (within the 48 contiguous states) in less than a week.