Pool Cover Pump
This pool cover pump is designed to automatically remove water from pool and spa covers. A float switch is provided for automatic operation and is equipped with a 25', 3-prong power cord.
Features
- 2100 GPH @ 0’
- Thermoplastic construction with built-in handles for ease of transport and installation
- 1” NPT discharge
- 3/4” garden hose adapter
- Activates in 1-1/2” of water
- Large base design for added stability
- Bottom screen removes easily for cleaning
- Internal automatic vertical float switch
- Hermetically sealed, oil cooled motor for long pump life
- Clog resistant impeller
- Motor is thermally protected with automatic reset thermal protector
- Energy efficient split capacitor motor. Lower amp draw, runs cooler, lasts longer
- Stainless steel motor shaft
- Carbon/ceramic/stainless steel mechanical shaft seal
- Upper and lower permanently lubricated ball bearings
- Stainless steel fasteners
- Acceptable for indoor or outdoor use
- Compact, lightweight design is easily portable
- Every unit is 100% pressure tested
Motor Specifications
HP |
1/3 |
Voltage |
120 volt AC |
Amps |
3.8 |
Hertz |
60 |
Phase |
Single |
RPM |
3450 |
Motor Type |
Permanent Split Capacitor (PSC) |
Insulation |
Class A |
Circuit
Requirements |
15 amp (mini) individual circuit |
Duty Rating |
For continuous operation, the water depth must be at least 1-1/2" to prevent the motor from overheating |
Shaft Seal |
Carbon/ceramic and stainless steel |
Motor Shaft |
Stainless Steel |
Upper Motor Bearing |
Ball Bearing |
Lower Motor Bearing |
Ball Bearing |
Cooling |
Oil cooled |
Motor Protection |
Auto reset thermal overload protection |
Pump Specifications
Discharge Size |
1" NPT & 3/4" Garden hose thread |
Cord Length |
25' |
Cord Type |
SJTW, UL Listed, 3-Wire, 18 gauge |
Pump Housing |
Thermoplastic |
Pump Base |
Thermoplastic |
Impeller Material |
Thermoplastic |
Impeller Type |
Clog Resistant |
Gasket |
Bruna-N |
Liquid Temp. Range |
32°- 120° F |
Operation |
Automatic |
Fasteners |
Stainless Steel |
Max Flow Rate |
35 Gallons per minute |
Maximum Head |
25 feet |
Max Pressure |
10.8 psi |
Weight |
11lbs |
Automatic Switch Specifications
Type |
Internal SJE Rhombus Vertical Master II |
Switch on point |
1-1/2" |
Switch off point |
1-1/4" |
Material |
High impact PVC |