For my 25 I needed two lamps. For the 15, you need just one. Putting them in is not a job you want to do "in place". Pull down the unit, lay out a soft towel on a table and take your time removing the old bulbs and putting in the new. Wear rubber gloves so you don't get skin oil on the lamps. The wiring is a bit tricky when installing two. Take your time, do one wire at a time, and it's not that bad.
Side note: my rubber grommets were worn out where the wires passed through the metal case and the hardware store did not have any that small. So, I pulled off some insulation from a 3-wire sprinkler cable, put it 1/2 way into the metal hole and glued it into position with a hot glue gun. Then, I just ran the new bulb wires through it as I put the new bulbs in. Worked great!
Start typing your question and we'll check if it was already asked and answered. Learn More
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 1 question
Browse 1 question
and 1 answer
What type of bulb uvb?
A shopper
on Apr 5, 2017
BEST ANSWER:IM not sure I understand the question, it was the factory replacement, with the wiring attached. I detached the unit from the wall and removed the mounting tray for the bulbs, then I removed and replaced the bulbs on the tray. Hope this helps.
BEST ANSWER:IM not sure I understand the question, it was the factory replacement, with the wiring attached. I detached the unit from the wall and removed the mounting tray for the bulbs, then I removed and replaced the bulbs on the tray. Hope this helps.
For my 25 I needed two lamps. For the 15, you need just one. Putting them in is not a job you want to do "in place". Pull down the unit, lay out a soft towel on a table and take your time removing the old bulbs and putting in the new. Wear rubber gloves so you don't get skin oil on the lamps. The wiring is a bit tricky when installing two. Take your time, do one wire at a time, and it's not that bad.
Side note: my rubber grommets were worn out where the wires passed through the metal case and the hardware store did not have any that small. So, I pulled off some insulation from a 3-wire sprinkler cable, put it 1/2 way into the metal hole and glued it into position with a hot glue gun. Then, I just ran the new bulb wires through it as I put the new bulbs in. Worked great!
Start typing your question and we'll check if it was already asked and answered. Learn More
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 1 question
Browse 1 question
and 1 answer
What type of bulb uvb?
A shopper
on Apr 5, 2017
BEST ANSWER:IM not sure I understand the question, it was the factory replacement, with the wiring attached. I detached the unit from the wall and removed the mounting tray for the bulbs, then I removed and replaced the bulbs on the tray. Hope this helps.
BEST ANSWER:IM not sure I understand the question, it was the factory replacement, with the wiring attached. I detached the unit from the wall and removed the mounting tray for the bulbs, then I removed and replaced the bulbs on the tray. Hope this helps.
Phone Support (Central Time)
6am - 6pm Monday - Saturday
NEWSLETTER
ABOUT THE STORE Pool Supply Unlimited is an e-commerce company that loves water. We love to pump it, filter it, heat it, chlorinate it, light it up and stare at it while we're barbequing a fat, juicy steak. There are real pool professionals working here. Our guys have seen thousands of pools in their careers, no exaggeration. We are based in San Antonio, TX and can land most products to your door (within the 48 contiguous states) in less than a week.