MultiCyclone 70XL 1st Stage Commercial Centrifugal Water Filtration - A Revolution in Pool Filtration!
Waterco's award-winning MultiCyclone technology uses the most advanced hydro cyclone technology to ensure high water quality and clarity.
An Australian innovation, the MultiCyclone is a pre-filtration device, which is designed to capture up to 80 per cent of the incoming dirt load prior to the main filter, which then significantly reduces filter maintenance and saves backwash water not to mention improving water circulation.
Waterco's award winning MultiCyclone is a brilliant pre-filtration device that works on the basis of centrifugal water filtration and is designed with no moving parts and no filter media to clean or replace.
MultiCyclone 70XL Commercial Filter
The MultiCyclone Commercial 70XL is a new addition to the MultiCyclone range. Although very different in appearance to the previously released models, this unit still has all the water and energy saving benefits of the standard MultiCyclone model. Specifically designed for commercial installations, the MultiCyclone Commercial has 4 ” ports and uses 70 cyclones allowing it to function with a flow rate of 423gpm. The debris can be seen through the clear sight glass and flushed out of the purge valve.
Ease Filter Workload
MultiCyclone pre-filters up to 80% of the filter's incoming dirt load easing the workload of the swimming pool filter. As the MultiCyclone intercepts more and more dirt, the flow rate remains unchanged.
- Improving pool water circulation
- Enhancing the performance of the automatic pool cleaner and in floor cleaning system
- Allowing effective pool vacuuming without burdening the pool filter
- Minimising filter maintenance and saving water
Minimise Backwash Frequency
The installation of a MultiCyclone as a pre-filter to a sand filter can reduce its backwash frequency to once per year, resulting in a saving of up to 7,000 litres of water per year for an average domestic sized swimming pool.
Minimise Cartridge Cleaning and Replacement
The installation of a MultiCyclone as a pre-filter to a cartridge filter can reduce filter cartridge cleaning and replacement to once per swimming season and even up to once per year, depending on the size of the cartridge filter.
The MultiCyclone is easily cleaned by opening its purge valve. Only 15 litres of water is discharged to cleanse the MultiCyclone.
When a Waterco Multicyclone Centrifugal Water Filter is installed within a swimming pool filtration system it is strongly recommended that no granular pool chemicals are added to the pool water through the pool skimmer box, unless there is the option to bypass the Multicyclone.
All pool chemical or additives are to be added to the pool water as instructed by the manufacturer's procedures, only.
||100mm/ 4" Nominal
||2.5 Bar (250kPa)