Our freeze/thaw resistant glass tile mosaics
are manufactured specifically for use in pools below and at the water-line so
they can be easily utilized for interior applications. Our unique Silycord
Polyurethane Link System does not degrade and is neither mesh, dot, nor
paper/plastic mounted so our mosaics have distinct & tangible advantages
including unlimited shelf life, no glue used in manufacturing (fully
submergeable), 100% unused recycled glass, and easier & faster
installation. Additionally, all our mosaics (except Perla) are available in
anti-slip for horizontal/floor applications.
Packaging Information - Case quantity for this tile is 21.6 Sq Ft per Case. Each case contains 12 sheets of tile. Mosaic Sheet size is
12.8 inches wide by 20.28 inches long.
This item is sold by the square foot only. Case quantity is only listed as a reference.
Not all glass tile is suitable for pool applications.
Refer to Glass Tile Manufacturer’s Documentation. Recommended Applications ~ Test Results ~ Installation Instructions.
Glass tile installed in pools should be:
- Impervious - <.5 % water absorption
- Freeze thaw resistant
- Chemically resistant
- High breaking strength - >350 lbf
- Face mounted
- Mesh mounted
- Film Face mounted
Recommended by glass tile manufacturer and material manufacturer for use in submerged applications.
- Cementitious Waterproofing - tank waterproofing
- Mortar Bed 4:1 Sand to Cement - no lime (bag mix ok if proper ratio)
- Elastomeric Membrane - optional mortar bed waterproofing
- Modified Thin-set or Epoxy Setting Material
- Cementitious or Epoxy Grout
- Flexible Sealant
Brand: Life's Tile