// Initialize Pentair / Channel Advisor Sales Reporting sTrack.initialise();
|
|
|
|
Raise the pH and alkalinity of the water. It helps maintain proper water balance, which is crucial for swimmer comfort and protecting pool equipment from corrosion.
100% Concentration
Key Features & Benefits:
Dosing Instructions:
1 lb for 10,000 gallons of water - raises pH by 0.1 (Refer to label for detailed instructions)
To raise pH: HASA SODA ASH increases pH in swimming pools. Measure pH in swimming pool water with an accurate test kit. Ideal pH range is 7.2-7.6. When the pH is below 7.2, add HASA SODA ASH at the rate of one (1) pound per 10,000 gallons. Add HASA SODA ASH by sprinkling over the surface of the water at the deep end of the pool while filter and pump are running. Do not add more than two (2) pounds at one time. Wait 4-6 hours and retest pH. Repeat if necessary.
To raise Alkalinity: HASA SODA ASH will raise total alkalinity. Measure total alkalinity with a test kit designed for this purpose. When total alkalinity is less than 80 ppm, add HASA SODA ASH at the rate of one (1) pound per 10,000 gallons of water to increase total alkalinity 10 ppm. DO NOT add more than two (2) at one time. Add in the same manner as when raising pH described above. Wait 4-6 hours and retest alkalinity. Ideal range is 80-120 ppm.