Clear & Perfect is a product that clarifies water. If you have cloudy or dull looking water, this is the product for you. Use to effectively and quickly to solve your yucky water problems.
Clear & Perfect is a great clarifier because it does not affect pH. One thing to avoid is using this product when there are high levels of chlorine in the pool (over 4 ppm). Also, avoid adding Clear & Perfect within 24 hours of using Metalfree or any metal stain treatment products.
There is no pre-mixing required with this product. Simply add according to the dosage rate below and watch in amazement as you pool becomes clear AND perfect!
STANDARD DOSAGE RATE:
1 oz (30mL) per 6000 gallons (22,700L) of pool water.
CLOUDY WATER DOSAGE RATE:
1 oz (30mL) per 4000 gallons (1 S,OOOL).
Squirt Clear & Perfect at recommended dosage rate per gallons of pool water over pool water surface, concentrating on deep water areas. Squirt Clear & Perfect onto surface until you reach suggested amount of ounces per gallons of water in your pool. See side of bottle for measurement marks. Run filter system continuously for at least six hours after application.