Raypak X94 ASME Digital Professional Condensing Gas Pool Heater | Natural Gas 399BTU | 014280
Sale $15,838.00 $14,009.00
Raypak Digital Professional X94 Condensing Gas Pool Heater
The Raypak X94 Professional heater comes standard as an ASME certified and stamped unit. Beingin the boiler business for over 60 years truly makes Raypak the leader for your commercial needs.Why ASME? Most local codes require that public pools, pools that are in condominiums, apartments,or other commercial applications, be in compliance with ASME Section IV.ASME stands for American Society of Mechanical Engineers, a non-profit group which sets many industrialand manufacturing standards. A pool heater that is made to ASME standards must conformto a set of specifications as determined by ASME, specifically in relation to the operating water pressurethe appliance can handle. Each and every ASME heat exchanger that goes into a Raypak Professionalheater is inspected to make sure it complies with the ASME Code for pool heaters.That’s why Raypak is the only pool heater manufacturer to supply a flow switch, PRV and T&P gauge standard with everyProfessional series gas heater under 400MBTU. We know what it takes to make a unit 50-state ASME compliant right out ofthe box. Does your heater company make sure all the little details are taken care of like Raypak does, or do you have tomake another trip to your distributor to get everything you need?
BASIC DATA
Model Number
Full Input
BTUH
Indoor Stack Dia.
014280
399,00
4" cat IV
Features:
94% Efficiency
ASME Code Stainless Steel Marine-Grade Heat Exchanger, stamped for 80 PSIG and National Board registered.
75 lb. Pressure Relief Valve and T&P gauge
External Bypass for High Flow Rates (up to 125 GPM)
Indoor/Outdoor construction
Limited Warranty, 3 Year Parts and Labor
2” PVC Slip Inlet/Outlet connection
115VAC 60Hz 1 HP Power Supply
Electronic, Intermittent Direct Spark Ignition (DSI)
Digital Display With Diagnostics and 7-Day Time Clock
Air-Fuel Ratio Combustion System provides a modulating response to changing needs
Condensate Drain port, ½” PVC
Propane
Low NOx, meets SCAQMD rule 1146.2
Requires Cat IV Venting: PVC, CPVC, Dura-Vent Polypro, or stainless steel
Raypak Digital Professional X94 Condensing Gas Pool Heater
The Raypak X94 Professional heater comes standard as an ASME certified and stamped unit. Beingin the boiler business for over 60 years truly makes Raypak the leader for your commercial needs.Why ASME? Most local codes require that public pools, pools that are in condominiums, apartments,or other commercial applications, be in compliance with ASME Section IV.ASME stands for American Society of Mechanical Engineers, a non-profit group which sets many industrialand manufacturing standards. A pool heater that is made to ASME standards must conformto a set of specifications as determined by ASME, specifically in relation to the operating water pressurethe appliance can handle. Each and every ASME heat exchanger that goes into a Raypak Professionalheater is inspected to make sure it complies with the ASME Code for pool heaters.That’s why Raypak is the only pool heater manufacturer to supply a flow switch, PRV and T&P gauge standard with everyProfessional series gas heater under 400MBTU. We know what it takes to make a unit 50-state ASME compliant right out ofthe box. Does your heater company make sure all the little details are taken care of like Raypak does, or do you have tomake another trip to your distributor to get everything you need?
BASIC DATA
Model Number
Full Input
BTUH
Indoor Stack Dia.
014280
399,00
4" cat IV
Features:
94% Efficiency
ASME Code Stainless Steel Marine-Grade Heat Exchanger, stamped for 80 PSIG and National Board registered.
75 lb. Pressure Relief Valve and T&P gauge
External Bypass for High Flow Rates (up to 125 GPM)
Indoor/Outdoor construction
Limited Warranty, 3 Year Parts and Labor
2” PVC Slip Inlet/Outlet connection
115VAC 60Hz 1 HP Power Supply
Electronic, Intermittent Direct Spark Ignition (DSI)
Digital Display With Diagnostics and 7-Day Time Clock
Air-Fuel Ratio Combustion System provides a modulating response to changing needs
Condensate Drain port, ½” PVC
Propane
Low NOx, meets SCAQMD rule 1146.2
Requires Cat IV Venting: PVC, CPVC, Dura-Vent Polypro, or stainless steel
Raypak, Inc. (“Raypak”) warrants to the original owner that the below model pool and spa heater (the “Heater”) when installed in the contiguous 48 states of the United States of America with a pool or spa by a properly licensed installer will be free from defects in materials and workmanship under normal use and service for the Applicable Warranty Period. The foregoing warranty will extend to subsequent owners solely as required by applicable state law. Under this Limited Warranty, Raypak will, at its option, repair or furnish a replacement for any defective part of the HEATER. The repair or replacement will be warranted for only the unexpired portion of the original Applicable Warranty Period (as defined below).
MODELS
WARRANTY PERIOD
AVIA Standard Models with copper
heat exchanger: 264*, 404*
Two (2) years following the Effective Date for parts and
labor.
AVIA HD Models with NiTek heat
exchanger: 264*, 404*
Two (2) years following the Effective Date for parts and
labor. Notwithstanding the foregoing, the NiTek heat
exchanger is warranted for three (3) years following the
Effective Date for parts and labor.
Pool and Spa Heater Models: 106A,
156A*, 206A*, 266A*, 336A*, 406A*,
207A*, 267A*, 337A*, 407A*
Two (2) years following the Effective Date for parts and
labor.
ASME Pool and Spa Heater Models:
206A, 266A, 336A, 406A, 207A, 267A,
337A, 407A
One (1) year following the Effective Date for parts and
labor.
Professional Pool and Spa Heater
Models: Professional digital heaters
268A, 408A, SR-410
Three (3) years following the Effective Date for parts
and labor.
Heat Pump Pool Heater Models: 2450,
3450, 4450, 5450, 6450, 8450, TWPH
4550, 5550, 6550, 6550EHC, 8550, &
8550EHC and Professional Series PS-
9350ti, PS9353ti, PS10353ti, PS10354ti,
PS10355ti
Two (2) years following the Effective Date for labor and
seven (7) years following the Effective Date for parts.
Notwithstanding the foregoing, the titanium tube component
of the titanium heat exchanger is warranted for ten
(10) years following the Effective Date for parts and two
(2) years following the Effective Date for labor.
Crosswind Heat Pump Pool Heater
Models: 30-I*, 40-I*, 50-I*, 65-I*
Two (2) years following the Effective Date for labor and
seven (7) years following the Effective Date for parts.
Notwithstanding the foregoing, the titanium tube component
of the titanium heat exchanger is warranted for ten
(10) years following the Effective Date for parts and two
(2) years following the Effective Date for labor.
E3T Single-Phase Pool and Spa Heater
Models: 0005*, 0011*, 0018*, 0027*
E3T 3-Phase Commercial Pool Heater
Models: 0018, 0024, 0030, 0045 and
0054
One (1) year following the Effective Date labor and
parts. Notwithstanding the foregoing, the electrical heating
element of the Heater is warranted for only ninety
days (90) following the Effective Date.
* THIS WARRANTY PERIOD IS NOT AVAILABLE FOR HEATERS INSTALLED ANYWHERE OTHER THAN A SINGLE-FAMILY RESIDENTIAL DWELLING, AS THIS HEATER IS NOT INTENDED FOR COMMERCIAL INSTALLATION.
See product warranty for specific details. Conditions apply. To register your product or to make a claim, please visit www.raypak.com/warranty.
This information was updated on 7/14/23. For the most current information and full warranty policy please visit www.raypak.com.
Phone Support (Central Time)
6am - 6pm Monday - Saturday
NEWSLETTER
ABOUT THE STORE Pool Supply Unlimited is an e-commerce company that loves water. We love to pump it, filter it, heat it, chlorinate it, light it up and stare at it while we're barbequing a fat, juicy steak. There are real pool professionals working here. Our guys have seen thousands of pools in their careers, no exaggeration. We are based in San Antonio, TX and can land most products to your door (within the 48 contiguous states) in less than a week.