Home Pool Diving Boards S.R. Smith Diving Boards SR Smith Frontier II Jump Stand with Frontier II Board Complete | 6' Radiant White with White Tread | 68-209-58662
SR Smith Frontier II Jump Stand with Frontier II Board Complete | 6' Radiant White with White Tread | 68-209-58662
$943.35
   |
|
|
Frontier II Stand with Frontier II Board
The Frontier II is a high-value stand and board ideal for price-sensitive customers.
S.R. Smith's Frontier II jump stand is big jumping fun at a great price! The white Frontier II stand can be paired with the Frontier II board, which comes in seven designer colors, to match your backyard decor. The steel base is powder coated to ensure the long life of your stand.
The Frontier II board features a high-grade, slip-resistant sand tread for maximum safety. Your board and stand combination also comes with an instructional diving video to ensure maximum safety when diving in your pool.
Specifications
- Jump Stand Model: Frontier II
- Jump Stand Color: Radiant White
- Board Model: Frontier II (3-hole)
- Board Size: 6-Foot Length
- Board Color: Radiant White with White Tread
- Board Weight Capacity: 250 lbs
All installations must comply with all applicable local and national codes and installation must be completed in accordance with S.R.Smith installation instructions.
Stand comes in white, with your choice of board color to match your pool slide and backyard décor.
*Not recommended for salt chlorine pools
Brand: S.R.Smith
4.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
1
0
0
Rated 3 out of 5
Good
It appears to be a descent diving board. The anchor bolts dont go very deep into concrete and I worry if too big of a person uses it it may pop out if concrete.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Diving Board
My grandchildren are enjoying the board.
My son-in-law installed this over the existing bolts that were already in the concrete from our previous board. It was nice
to be able to find a board and base that fit our previous board.
My son-in-law installed this over the existing bolts that were already in the concrete from our previous board. It was nice
to be able to find a board and base that fit our previous board.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Rated 4 out of 5
Good Springy Board
Easy installation overall, but was expecting a little more spring in the board. Overall happy with it. This is a good diving board for the money.
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
February 8, 2015
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
Reviews for Similar Products
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 3 questions
Browse 3 questions
and 8 answers
What are the measurements of the holes for the bolts? This would be a replacement board for us so we already have bolts coming up from our deck
Janice H
on Oct 20, 2015
BEST ANSWER: Ours was also a replacement & fit perfectly. The hole diameter is approx.1" & the space between the bolts is about 3" at the back & 6" to the front one. Hard to measure accurately when it's installed. The online chart measurement from SR Smith is good reference too. Hope this helps. Jan
- Reply
- Inaccurate
- Janet C on Oct 28, 2015
- Purchased on Jun 3, 2015
BEST ANSWER: Ours was also a replacement & fit perfectly. The hole diameter is approx.1" & the space between the bolts is about 3" at the back & 6" to the front one. Hard to measure accurately when it's installed. The online chart measurement from SR Smith is good reference too. Hope this helps. Jan
- Reply
- Inaccurate
- Janet C on Oct 28, 2015
- Purchased on Jun 3, 2015
Ours was also a replacement board and the bolts coming out of the concrete for the spring to set on are the two back bolts are 3 1/2 inches apart from each other and the front single bolt is 6 inches from them measured on a angle from back bolt to the front bolt.
- Reply
- Inaccurate
- Stan H on Oct 28, 2015
- Purchased on Jun 5, 2015
Hi Janice ...We replaced our diving board on a crib dock that we rebuilt on Flathead Lake. We drilled and secured diving board with 3 non factory bolts downward. We are 20 minutes from the lake. I will measure and forward you those measurements. Dan H
- Reply
- Inaccurate
- Dan H on Oct 28, 2015
- Purchased on May 27, 2014
The space between the 2 rear holes is 3 3/16" and the distance between the front hole and either rear hole is 6 3/16". This is measured from the bolt kit supplied with the board for new installments. I measured from center of the bolts. Hope this helps.
- Reply
- Inaccurate
- Roger G on Oct 29, 2015
- Purchased on Jun 20, 2015
Janice...The distance between the 3 holes are 6 1/4 - 6 1/4 - 3 1/4. Dan H
- Reply
- Inaccurate
- Dan H on Oct 28, 2015
- Purchased on May 27, 2014
Vote for the best answer above!
Can you purchase just the board by itself?
A shopper
on May 21, 2017
BEST ANSWER: I don't know. I bought the stand with the board because I needed it. The supplier should be able to tell you that
- Reply
- Inaccurate
- Janet C on May 21, 2017
- Purchased on Jun 3, 2015
BEST ANSWER: I don't know. I bought the stand with the board because I needed it. The supplier should be able to tell you that
- Reply
- Inaccurate
- Janet C on May 21, 2017
- Purchased on Jun 3, 2015
I have attached the item you would like.
SR Smith Frontier II 3-Hole Board 6' Radiant White | 66-209-586S2
- Reply
- Inaccurate
- D'Lorean S Staff on Sep 22, 2017
Vote for the best answer above!
Do I need to buy a jig with this as well? This will be a new install on a concrete deck. If I do need a jig, where can I find one for this board?
Jason S
on May 17, 2016
BEST ANSWER: Yes the jig is what is cemented into the concrete and once the cement sets the board is bolted to it. Our new board came with a jig.
- Reply
- Inaccurate
- Stan H on May 19, 2016
- Purchased on Jun 5, 2015
BEST ANSWER: Yes the jig is what is cemented into the concrete and once the cement sets the board is bolted to it. Our new board came with a jig.
- Reply
- Inaccurate
- Stan H on May 19, 2016
- Purchased on Jun 5, 2015
Vote for the best answer above!
Questions For Similar Products
Parts Content
SR Smith Frontier II Jump Stand with Frontier II Board Complete | 6' Radiant White with White Tread | 68-209-58662
$943.35
Platinum Preferred Manufacturer
Purchase options
Products included in package
SR Smith Frontier II 3-Hole Board 6' Radiant White | 66-209-586S2
Quantity Included: 1
SR Smith 6' Frontier II Spring Assembly with Jig 3-Hole | 69-209-5866
Quantity Included: 1
Product description
Frontier II Stand with Frontier II Board
The Frontier II is a high-value stand and board ideal for price-sensitive customers.
S.R. Smith's Frontier II jump stand is big jumping fun at a great price! The white Frontier II stand can be paired with the Frontier II board, which comes in seven designer colors, to match your backyard decor. The steel base is powder coated to ensure the long life of your stand.
The Frontier II board features a high-grade, slip-resistant sand tread for maximum safety. Your board and stand combination also comes with an instructional diving video to ensure maximum safety when diving in your pool.
Specifications
- Jump Stand Model: Frontier II
- Jump Stand Color: Radiant White
- Board Model: Frontier II (3-hole)
- Board Size: 6-Foot Length
- Board Color: Radiant White with White Tread
- Board Weight Capacity: 250 lbs
All installations must comply with all applicable local and national codes and installation must be completed in accordance with S.R.Smith installation instructions.
Stand comes in white, with your choice of board color to match your pool slide and backyard décor.
*Not recommended for salt chlorine pools
Features and details
- Made of strong steel and powder coated for increased corrosion resistance
- 6' or 8' lengths find the right size for your diving pool!
- Stand comes in white, with your choice of board color to match your pool slide and backyard décor
- Stainless steel hardware for added corrosion resistance
- Board has an anti-slip sanded tread for maximum safety
Specifications
Length
6'
Salt Friendly
No
Bolt Holes in Board
3
Material
Fiberglass
Color
Radiant White
Tread
White
Warranty
S.R.Smith, LLC warrants to the original retail purchaser that products manufactured by S.R.Smith, when properly assembled and installed in accordance with S.R.Smith's assembly and installation instructions, and properly used and maintained, shall be free from defects in materials and workmanship for the warranty period of three (3) years from the date of retail purchase except for the following items set forth below:
- Game Accessories (ball, pump, net): Ninety Days
- WetDek: One Year
- Resin Transfer Molded (RTM) Slides, Seats, Loungers, and Tables: One Year
- Aquatic Lift System Frames (excluding the powder coated finish, which may become scratched with normal use): Five Years
- Aquatic Lift System Electronic and Motor Components (excluding batteries): Two Years
- Aquatic Lift batteries: One year prorated as follows: 100% of cost during the first ninety days of ownership and 50 percent of cost after ninety days and prior to expiration of one-year period. Normal maintenance and care of the unit, including charge of the battery when not in use is recommended.
- Lighting: See below
- Pool Cover Rewinders - Frames: Five Years
- Pool Cover Rewinders - Electric and Motor Components: Two Years
- Thermal Pool Covers: See documents
Lighting Parts
Labor
3-Years 1-Year PoolLUX Controls- Power, Plus, Plus2, Premier
2-Years 1-Year PT- Series
2-Years 1-Year Wiretran Control
1-Year 1-Year TX-30 Control
1-Year 1-Year WPC Controls
1-Year 1-Year Fiber Optic Illuminators - 6004 Series
3-Years 1-Year Fiber Optic Cable
1-Year n/a Water Features
1-Year n/a
To register your S.R.Smith product, visit the Product Registration page at: www.srsmith.com.
|
|
|
|
|
4.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
1
0
0
Rated 3 out of 5
Good
It appears to be a descent diving board. The anchor bolts dont go very deep into concrete and I worry if too big of a person uses it it may pop out if concrete.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Rated 5 out of 5
Diving Board
My grandchildren are enjoying the board.
My son-in-law installed this over the existing bolts that were already in the concrete from our previous board. It was nice
to be able to find a board and base that fit our previous board.
My son-in-law installed this over the existing bolts that were already in the concrete from our previous board. It was nice
to be able to find a board and base that fit our previous board.
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (1)
- Flag as Inappropriate
Rated 4 out of 5
Good Springy Board
Easy installation overall, but was expecting a little more spring in the board. Overall happy with it. This is a good diving board for the money.
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
February 8, 2015
- Was this review helpful? Yes (1) No (2)
- Flag as Inappropriate
Reviews for Similar Products
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
Browse 3 questions
Browse 3 questions
and 8 answers
What are the measurements of the holes for the bolts? This would be a replacement board for us so we already have bolts coming up from our deck
Janice H
on Oct 20, 2015
BEST ANSWER: Ours was also a replacement & fit perfectly. The hole diameter is approx.1" & the space between the bolts is about 3" at the back & 6" to the front one. Hard to measure accurately when it's installed. The online chart measurement from SR Smith is good reference too. Hope this helps. Jan
- Reply
- Inaccurate
- Janet C on Oct 28, 2015
- Purchased on Jun 3, 2015
BEST ANSWER: Ours was also a replacement & fit perfectly. The hole diameter is approx.1" & the space between the bolts is about 3" at the back & 6" to the front one. Hard to measure accurately when it's installed. The online chart measurement from SR Smith is good reference too. Hope this helps. Jan
- Reply
- Inaccurate
- Janet C on Oct 28, 2015
- Purchased on Jun 3, 2015
Ours was also a replacement board and the bolts coming out of the concrete for the spring to set on are the two back bolts are 3 1/2 inches apart from each other and the front single bolt is 6 inches from them measured on a angle from back bolt to the front bolt.
- Reply
- Inaccurate
- Stan H on Oct 28, 2015
- Purchased on Jun 5, 2015
Hi Janice ...We replaced our diving board on a crib dock that we rebuilt on Flathead Lake. We drilled and secured diving board with 3 non factory bolts downward. We are 20 minutes from the lake. I will measure and forward you those measurements. Dan H
- Reply
- Inaccurate
- Dan H on Oct 28, 2015
- Purchased on May 27, 2014
The space between the 2 rear holes is 3 3/16" and the distance between the front hole and either rear hole is 6 3/16". This is measured from the bolt kit supplied with the board for new installments. I measured from center of the bolts. Hope this helps.
- Reply
- Inaccurate
- Roger G on Oct 29, 2015
- Purchased on Jun 20, 2015
Janice...The distance between the 3 holes are 6 1/4 - 6 1/4 - 3 1/4. Dan H
- Reply
- Inaccurate
- Dan H on Oct 28, 2015
- Purchased on May 27, 2014
Vote for the best answer above!
Can you purchase just the board by itself?
A shopper
on May 21, 2017
BEST ANSWER: I don't know. I bought the stand with the board because I needed it. The supplier should be able to tell you that
- Reply
- Inaccurate
- Janet C on May 21, 2017
- Purchased on Jun 3, 2015
BEST ANSWER: I don't know. I bought the stand with the board because I needed it. The supplier should be able to tell you that
- Reply
- Inaccurate
- Janet C on May 21, 2017
- Purchased on Jun 3, 2015
I have attached the item you would like.
SR Smith Frontier II 3-Hole Board 6' Radiant White | 66-209-586S2
- Reply
- Inaccurate
- D'Lorean S Staff on Sep 22, 2017
Vote for the best answer above!
Do I need to buy a jig with this as well? This will be a new install on a concrete deck. If I do need a jig, where can I find one for this board?
Jason S
on May 17, 2016
BEST ANSWER: Yes the jig is what is cemented into the concrete and once the cement sets the board is bolted to it. Our new board came with a jig.
- Reply
- Inaccurate
- Stan H on May 19, 2016
- Purchased on Jun 5, 2015
BEST ANSWER: Yes the jig is what is cemented into the concrete and once the cement sets the board is bolted to it. Our new board came with a jig.
- Reply
- Inaccurate
- Stan H on May 19, 2016
- Purchased on Jun 5, 2015
Vote for the best answer above!
Questions For Similar Products
Parts Content
HABLAMOS ESPAÑOL
Hay muchas maneras diferentes de contactarnos, y nos gustaría hablar con usted sobre las preguntas de su compra, ayudarle a diagnosticar los problemas de su equipo y escuchar acerca de cómo podemos mejorar y todo lo que está en su mente.
Click Here
Click Here
OPEN 6 DAYS A WEEK
Phone Support (Central Time)
6am - 6pm Monday - Saturday
6am - 6pm Monday - Saturday
NEWSLETTER
ABOUT THE STORE
Pool Supply Unlimited is an e-commerce company that loves water. We love to pump it, filter it, heat it, chlorinate it, light it up and stare at it while we're barbequing a fat, juicy steak. There are real pool professionals working here. Our guys have seen thousands of pools in their careers, no exaggeration. We are based in San Antonio, TX and can land most products to your door (within the 48 contiguous states) in less than a week.
Pool Supply Unlimited is an e-commerce company that loves water. We love to pump it, filter it, heat it, chlorinate it, light it up and stare at it while we're barbequing a fat, juicy steak. There are real pool professionals working here. Our guys have seen thousands of pools in their careers, no exaggeration. We are based in San Antonio, TX and can land most products to your door (within the 48 contiguous states) in less than a week.
COMPANY
ABOUT US
CONTACT US
CONTACTO
CUSTOMER REVIEWS
FAQ
HOURS OF OPERATION
PRIVACY
SITE MAP
TESTIMONIALS
ABOUT US
CONTACT US
CONTACTO
CUSTOMER REVIEWS
FAQ
HOURS OF OPERATION
PRIVACY
SITE MAP
TESTIMONIALS
MY ACCOUNT
LOGIN
FORGOT PASSWORD
LOYALTY POINTS
RETURN MERCHANDISE
PROMOTIONS
COUPONS
SALES
NEWSLETTER
BREAD FINANCING
PROTECTION PLANS
LOGIN
FORGOT PASSWORD
LOYALTY POINTS
RETURN MERCHANDISE
PROMOTIONS
COUPONS
SALES
NEWSLETTER
BREAD FINANCING
PROTECTION PLANS
TERMS
INTERNATIONAL ORDERS
LOYALTY POINTS TERMS
RETURNS POLICY
SHIPPING POLICY
RESOURCES
BLOG
PRODUCT MANUALS
INTERNATIONAL ORDERS
LOYALTY POINTS TERMS
RETURNS POLICY
SHIPPING POLICY
RESOURCES
BLOG
PRODUCT MANUALS
The manufacturer asked us not to share
the price until it's in your cart.
It's just too good of a deal.
the price until it's in your cart.
It's just too good of a deal.
- Excellent pre-sale and after-sale service
- Provides regular training on product line
- Helps with warranty resolution
- Refers business to our websites
- Provides advantageous pricing
- Provides designated contact person
- Includes retail websites in their dealer locator
- Excellent pre-sale and after-sale service
- Provides regular training on product line
- Helps with warranty resolution
- Provides designated contact person
- Includes retail websites in their dealer locator
- Good pre-sale and after-sale service
- Provides designated contact person
- Includes retail websites in their dealer locator