WYBOT A1 Cordless Robotic Pool Cleaner
Not just another pool robot - it's the future of pool care. With built-in AIVision and solar power, WYBOTdoesn't just clean - it sees, thinks, and adapts. It's like having a self-driving Tesla for your swimming pool.
Providing crystal-clear water and a hassle-free experience for pool enthusiasts!
Features:
- Supported Pool Types - For all pool types with flat bottom (max slope < 15°) and floor only
- Ideal Pool Smaller Than Size - 1076ft²,providing up to 120 minutes of continuous run time
- 120-Minute Ultra-Long Working Time - The A1 boasts an extended runtime of up to 120 minutes (suitable for flat-bottom pools), a 50-100% increase from last year. Additionally, the suction port is twice the size of the previous generation, allowing for the suction of larger debris. The maximum cleaning area reaches 1076 sq. ft, meeting the cleaning needs of most above-ground flat-bottom pools
- User-friendly Interface -The charging port, power button, and LED indicator lights of WYBOT A1 are all conveniently located on the top of the machine, unlike other machines where they are situated at the bottom. This design greatly enhances customer convenience, resulting in a more user-friendly interaction interface
- Efficient Cleaning -With dual-motor power, 180μm fine cotton foam
- Scheduled Cleaning, Time and Effort Saving - By setting a scheduled cleaning time, you can automatically arrange the robot to clean on specific days, without the need for manual operation. This ensures your pool stays clean at the desired time and saves you the time and effort of manual cleaning each time
- Cycle Timer - Specify the frequency, up 4 times 7 days
- 2.5-hour Fast Charging - Equipped with the latest fast-charging technology, an instant pool cleaning experience is no longer a dream. Breaking away from the long charging times of 6-7 hours in the past, now it only takes 2.5 hours to get a wireless pool robot with powerful dirt suction
- Patented Edge Enhanced Cleaning Feature - Overcoming the current industry challenge of pool robots unable to clean edges, WYBOT A1 pauses for a few seconds upon reaching the pool wall edge to enhance cleaning in that area
- Easy to Retrieve - Built in intelligent self-parking system
- Rare Dual-Layer Filtration System - Unlike other pool robots equipped with a single filter basket, the WYBOT A1 features a dual-layer filtration system: 180μm + cotton foam filtration, with a 70% increase in filtration area, significantly boosting filtration capacity. It effectively captures various debris, sand, leaves, and more from the pool, providing you with a higher level of pool cleanliness
| General - Technical Specifications |
| Color |
Black & Green |
| Type |
Cordless |
| Operating Temperature |
41°F-95°F |
| Cleaning Coverage |
Floor Only (max slope < 15°) |
| Working Cycle |
120 minutes |
| Ideal Pool Size |
1076 ft² |
| Pool Classification |
Above Ground & Inground |
| Pool Surfaces |
All Surfaces |
| Pool Shape |
All Shapes with Flat Floor ( Slope<15°) |
| IP Grade |
IPX8 |
| Water Depth |
Max. 8.2ft |
| Robot |
| Waterline Scrubbing |
No |
| Scrubbing Type |
Suction and 2 Scrapers |
| Filter |
180μm Filter+Ultra-fine cotton foam |
| Motor |
Dual Drive Motors |
| Suction Rate |
2140 GPH |
| App /Remot Control |
No |
| Enhanced Edge Cleaning |
Yes |
| Eco Cleaning |
Set work durations to 120, 60, 40, or 30 mins |
| Moving Speed |
52.5ft/min |
| Self-Parking |
Yes |
| Main Feature |
Top Interaction, Battery Indicator Light |
| Battery |
| Battery Type |
Lithium battery |
| Capacity |
2600mAH |
| Charging Voltage Limit |
22.2 V |
| Input |
100-240 V (AC), 50-60 Hz |
| Charging Environment Temperature |
41°F-95°F |
| Operating Temperature |
50°F-95°F |
|
(Tested in a laboratory environment and should be used for reference only) |
| Charging Time |
2H - 2.5H |
| Output |
25.2V, 1A |
| Power |
33W |
| Robot Weight |
7.7 lb |
*WYBOT A1 has upgraded dual-layer filtration. Use the appropriate filter based on pool turbidity. For dirty pools, we recommend only using the 180μm filter tray and flushing it every half hour to avoid damage to the motor, affecting normal use. Remember to put the 180μm filter back after flushing.