Zodiac Pool Systems, Inc. is pleased to announce further enhancements to the AquaPure Tri-Sensor. Although there is a slight change in the appearance of the Tri-Sensor, it still functions the same and delivers improved functionality as follows:
The sensor no longer needs the flow adapter board (Fig 1 Below) which will allow for a More Streamlined installation experience. A new Sensor Interface Module (Fig 2) will be used to select which firmware Power Interface Board the sensor is connected to. Program A should be selected with new systems. Older systems (including AKC13) back boards, may require Program B to be selected.
The sensor is now able to slip through the union nut for easier installation and service.
The Sensor Interface Module is weatherproof and should be left outside (Fig 3a) of the power center enclosure (Fig 3b).
A letter will be included with each new Tri-Sensor ALERTING Installers about the new installation instructions.
Tri-Sensor R-kits will ship first, beginning with date code 10/6/14. A separate communication will follow regarding the release timing for finished goods (complete PLC cell kits and FSOFT kits) once they start shipping with the new Tri-Sensor. Part numbers and pricing are not affected.
Brand: Zodiac Pool Systems