Everyone wants to have crystal clear pool water. Why not keep up to date and improve your water clarity by adding safe and effective products. Orenda Technologies are committed to using their enzyme technologies to treat all types of recreational bodies of water.
These changing ways are to control the amount of
pool chemicals added and use earth friendly solutions to help maintain that perfect water balance. All though the maintenance is sometimes tough, its best to have a routine. Keeping up with this routine is the secret to beautiful, healthy, refreshingly clean water.
Listed are some additive agents that Orenda Tech offers. Most are offered in multiply sizes that can accommodate any residential or commercial application. They are proud to offer such award-winning formulations that implement environment-friendly chemical technology.
Orenda offers some instructions on opening and close your pool per season. These can be costly measures that can be avoided with taking the time to do simple seasonal steps.
Orenda Open/Close Instructions
Open/Close kit is a non-chlorine kit using Enzyme technology along with Phospate Remover and Scale & Metal Control. This kit is approved to treat approximately 10,000 gallons of water. The three products in collaboration will provide exceptional contaminate removal along with providing a protection for plaster.
Pool Opening Using Orenda
Step 1: Take off pool Cover completely
Step 2: Fill pool to middle of tile line and turn on equipment.
Step 3: Check all chemical levels and adjust accordingly to industry standards. Do not super-chlorinate.
Step 4: Add the following.
1 qt. Scale & Metal Control
1 qt. Enzyme Water Cleaner
1 pt. Phosphate Remover Concentrate
Allow the pool to circulate for 24 hours.
Step 5: Vacuum, Brush, and Net the pool after the 24 hours of circulation. Backwash the filter after vacuuming if necessary.
Step 6: Recheck chemical levels and adjust if necessary.
*pH:7.4-7.6 *Chlorine:1-5ppm *Alkalinity:80-120ppm *Calcium:200-400ppm *Stabilizer:35-40ppm
Pool Closing Using Orenda
Step 1: Check all chemical levels and adjust accordingly to industry standards. Do Not Super-Chlorinate
Step 2: Add the following.
1 qt. Scale & Metal Control
1 qt. Enzyme Water Cleaner
Allow the pool to circulate for 24 hours.
Step 3: Brush and net the pool after the 24 hours of circulation.
*Do Not Add Phosphate Remover When Closing
Backwash and clean the filter after vacuuming.
