Seal & Gasket Kit for Pentair WhisperFlo & IntelliFlo Pool Pumps | GO-KIT32 APCK1027

This kit is a must when replacing the motor for your Pentair pump. It comes with everything that you need to make the replacement as easy as possible, thanks.<br>

The kit arrived with no issues and the seals and gaskets worked to perfection. Pool pump is now back in service.

The kit was complete and worked okay. However, it lacked the two small o-rings for the two lower thumbscrew water release ports. As it turned out after replacing the main o-rings, leaks from the two thumbscrews appeared as there were no longer easier leaks from the main rings. I did not realize the kit was missing these two small o-rings, until I watched the Pentair and other YouTube videos, showing the complete o-ring replacement procedure for the Whisper Flow pumps. The Pool Supply Unlimited rep I spoke with when I placed my order did not mention anything about the kit lacking any o-rings. I will now need to contact them and get the missing rings..

I have 2 gripes on this kit. 1) The seal plate gasket had sets from being folded and also had to be stretched to fit the plate. I had to glue it in using 12 clamps to hold it in place for installation. 2) This kit did not include an impeller screw gasket actually a small rubber washer. Local store charged me $12 for a little washer that should be a 50cent piece. Otherwise it had plenty of lub for the o rings & seal fits nicely - no unusual noise.

The large seal did not stay on and we had to use the old one which may be causing a small leak how do we get a replacement