Home Pool Salt Cell Replacements Jandy & Chlormatic Replacement Cells Zodiac Jandy AquaPure Salt Cell Flow & Salinity Sensor for 3-Port Cells 16' Cable | R0452500

Zodiac Jandy AquaPure Salt Cell Flow & Salinity Sensor for 3-Port Cells 16' Cable | R0452500

Typically ships same business day when ordered by 2pm EST


Flat Rate ShippingFlat Rate Shipping $4.95
  • Comes complete with sensor, 16' cable attached, & O'ring
  • Used on newer style 3-port Jandy salt cells
  • When used with a PureLink power center purchasing a R0538600 adapter is required
  • Adapter not required for AquaPure salt generators
Purchase Options
Zodiac Pool Systems, Inc. is pleased to announce further enhancements to the AquaPure Tri-Sensor. Although there is a slight change in the appearance of the Tri-Sensor, it still functions the same and delivers improved functionality as follows:

The sensor no longer needs the flow adapter board (Fig 1 Below) which will allow for a More Streamlined installation experience. A new Sensor Interface Module (Fig 2) will be used to select which firmware Power Interface Board the sensor is connected to. Program A should be selected with new systems. Older systems (including AKC13) back boards, may require Program B to be selected.
The sensor is now able to slip through the union nut for easier installation and service.

The Sensor Interface Module is weatherproof and should be left outside (Fig 3a) of the power center enclosure (Fig 3b).

A letter will be included with each new Tri-Sensor ALERTING Installers about the new installation instructions.

Tri-Sensor R-kits will ship first, beginning with date code 10/6/14. A separate communication will follow regarding the release timing for finished goods (complete PLC cell kits and FSOFT kits) once they start shipping with the new Tri-Sensor. Part numbers and pricing are not affected.

Brand: Zodiac Pool Systems
Q & A
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 35 answers
Why did you choose this?
Pool Supply Unlimited Store
Kendall L on Jun 21, 2018
Needed a new sensor and this was among the lowest on the internet. Hope it gets here in decent time.
Cheng Y on Jun 5, 2018
Kendall L on Jun 21, 2018
Good price
Bruce S on Jun 19, 2018
Needed a new sensor and this was among the lowest on the internet. Hope it gets here in decent time.
Cheng Y on Jun 5, 2018
Best Price
Steve H on Jun 4, 2018
Best pricing.
Ken M on Jun 4, 2018
Best Price
Ed V on May 7, 2018
I have aquapure 1400 system.
Chenggang H on Sep 24, 2017
needed it for my pool,
Joseph C on Sep 21, 2017
mine is not working anymore, so I need a new one for my pool
lala z on Sep 11, 2017
I need a replacement sensor for the Jandy Aqua Pure PLC 1400
Michael C on Sep 9, 2017
needed it
Bruce H on Aug 31, 2017
Lowest price
Paul P on Aug 24, 2017
Best price found.
Lee R on Aug 20, 2017
I needed a sensor for my pool and this was the best price on the internet.
Will W on Aug 19, 2017
Existing flow monitor not functioning
Michael D on Aug 5, 2017
to replace H0283600B sensor - hope it fits
Guy S on Aug 5, 2017
Best price and free shipping. What else do you want?
Anthony E on Aug 2, 2017
need replacement
Mary C on Aug 1, 2017
good deal
Francois C on Jul 8, 2017
need replacement
chris g on Jun 26, 2017
need it
Victor F on Jun 26, 2017
Cables are brittle, and break easy.
Jose P on Jun 24, 2017
with the money saved below we purchased the sensor which needed replacement as well and bought both for the same price a the official jandy replacement cell
Bonnie H on Jun 17, 2017
Dennis S on May 29, 2017
Replacement for current one that died.
John C on May 28, 2017
My 3-Port AquaPure sensor triggers 172/186 error codes on AquaPure 1400 chlorine generator.
Ian F on May 18, 2017
bad design of flow sensor means it needs to be replaced frequently, do not recommend this system to anyone.
Dan R on Jun 27, 2016
Because it is broken. Duh...
Erwin H on Jan 30, 2016
Good price
Bruce S on Jun 19, 2018
Best Price
Steve H on Jun 4, 2018
I need to replace a Zodiac H0283600B slotted senor in a 3 port Aquapure Salt Cell. The existing sensor has 1 prong to fit into 1 slot. The replacement part looks like it has two prongs opposite the single one. Will it still fit?
alan s on May 17, 2016
BEST ANSWER: It will fit. The single prong fits in the slot. The double prongs are shorter, and fit inside the inner diameter.
Should the module be set for Program A or Program B? How do I know which setting to use? What's the difference? Thank you!
Barbara S on Jan 4, 2018
BEST ANSWER: I "think" Program A, as when I review my programs (Pump hours, solar time, etc..) on my Jandy Aqalink indoor panel, it comes up w/ all my programs on Program A. Again, that's my educated guess, so let the pool professionals verify / confirm this information. Dennis "not a pool professional" W.
I have a Jandy Aqua Pure PLC1400 - will this work with it?
Stephanie W on May 17, 2018
BEST ANSWER: Sorly that I can't answer that, I purchased that unit for a Fusion unit.
Is this a replacement for the R0403700?
conrad c on Apr 17, 2018
BEST ANSWER: No. This won't work with that model. The sensor is not threaded, and is meant to work with later versions of the Aquapure.
25 ft cable for R0452500 ?
Robert B on Nov 6, 2017
BEST ANSWER: yeah - kind of crazy, but mine is zip tied to some pipes.....
Do you have one with a 8 foot cable?
A shopper on Aug 24, 2017
BEST ANSWER: Unfortunately, this is would be the shortest cord available.
2.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Although, this new version looks a little more improved version of the one I bought last year, it cost me $208 all over again. I hate to think about paying for a product this kind of money every year. Wouldn't you?
September 21, 2016
1 year ago
Easy install. Promptly shipped and received in good order. Best price that I could find.
July 9, 2017
1 year ago
Perfect fit
Perfect fit for my Jandy cell. Arrived quickly with no damages. Will definitely continue to purchase my pool products from your company!
November 4, 2016
Jandy tri-sensor
The Tri sensor I bought from these guys doesn't work....it did for about a week then.....nothing
June 14, 2018
1 month ago
Adobe Acrobat PDF Installation Instructions

How do I register for the warranty with my new Zodiac product?
For Zodiac's warranty registration information, and to submit online, please click here.  You can also access more information about Zodiac by visiting our manufacturer page.
How do I register for the warranty with my new Polaris product?
For Polaris' warranty registration information, and to submit online, please click here.

Zodiac Limited Warranty

Zodiac Pool Systems, Inc. (“Zodiac”) warrants all Zodiac brand products (including those branded as Baracuda®, Jandy®, or Nature2®) to be free from manufacturing defects in materials and workmanship for a period of one (1) year from the date of retail purchase, with the following exceptions:

  1. Zodiac heat pumps are warranted for two (2) years. Heat pump compressors and heat exchangers are warranted for five (5) years.
  2. Jandy Pro Series variable-speed pumps that are professionally installed on or after October 1, 2015, will be warranted for a period of three (3) years from date of purchase.
  3. Jandy Pro Series & SAVI nicheless underwater LED lights (including LED light drivers for: bubblers, lit falls, and celestial fiber) that are professionally installed on or after August 1, 2015, will be warranted for a period of three years from date of purchase.
  4. Electronic salt water chlorine generators, including Nature2 Fusion Soft, are warranted for three (3) years, with the exception of the Zodiac AquaPure® Ei™ Series, which is warranted for one (1) year.
  5. Never Lube® valves are warranted for the life of the pool on which they were originally installed.
  6. In-floor cleaning heads are warranted for the life of the pool on which they were originally installed, if originally installed with Zodiac’s in-floor cleaning valves. In-floor cleaning hydraulic valves, UltraFlex® 2 valve housings, and leaf removal deck canisters are warranted for three (3) years.
  7. Zodiac robotic cleaners are warranted for two (2) years.
  8. Kontiki cleaners are warranted for ninety (90) days.
  9. Pool cleaner wear-and-tear items including, but not limited to, tires (including track tires), surface disks, shoes, and footpads, are not warranted.
  10. Refrigerant and other expendables are not warranted.
  11. Replacement products, or parts, provided at no charge are warranted only until the original finished good’s warranty has expired. Purchased replacement parts are warranted for ninety (90) days from the date of retail purchase, with the exception of electronic salt water chlorine generator cells and electrodes, which are warranted for one (1) year.

For warranty information specific to Nature2 products, other than Nature2 Fusion Soft, please see the owner’s and installation manuals for those products.

Unless otherwise indicated in the relevant product manual or quick start guide, this warranty applies only to products installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed, where such state or local requirements exists. In the event no such state or local requirement exists, the installer and maintainer must be a professional with sufficient experience in pool equipment installation and maintenance. This warranty applies only to products purchased and utilized in the 50 United States and Canada, is limited to the first retail purchaser, is not transferable, and does not apply to products that have been moved from their original installation sites. The liability of Zodiac shall not exceed the replacement of the defective product or its parts, and does not include transportation costs, costs for labor to service or repair the defective product, or any items or materials required to make the repair including, but not limited to, refrigerant and other expendables. Zodiac is not responsible for charges or delays incurred when a servicer is unable to perform service due to lock outs, animals, intolerable pool or spa water temperature when entry into pool or spa is required to perform service, service refusals, etc. No reimbursements will be made for loss and/or usage of water, fuel or other resources resulting from product defect. A third party service provider may charge the end-user customer for parts and/or labor required to resolve any issue not covered under warranty, such as improper installation. Zodiac is not responsible for these charges. Product discoloration, or any other cosmetic or superficial damage or deterioration, regardless of its cause, is not covered by this warranty. This warranty does not cover failures, defects, malfunctions or complaints resulting from any of the following:

  1. Failure to properly install, operate or maintain the product in accordance with Zodiac’s published installation, operation and/or maintenance manuals.
  2. The workmanship of any installer of the product.
  3. Use of non-factory authorized parts or accessories in conjunction with the product(s).
  4. Product modifications or adjustments that are not in accordance with Zodiac’s published installation, operation and/or maintenance manuals.
  5. Not maintaining proper pool and/or spa chemical balance [pH levels between 7.2 and 7.8, with ideal range being between 7.4 and 7.6; Total Alkalinity (TA) between 80 to 120 ppm; Total Dissolved Solids (TDS) less than 2000, not including salt ppm].
  6. Corrosion, erosion, scaling, calcification or other conditions caused by water hardness, chemical imbalance, or lack of product maintenance.
  7. Chemical contamination of combustion air; or improper use of pool/spa chemicals, such as introducing chemicals upstream of the heater or cleaner hose, or through the skimmer; or use of copper-based algaecides in conjunction with Nature2 products.
  8. Abuse, damage during transit or installation, mis-handling, tampering, vandalism, alterations, accidents, fires, floods, storms, earthquakes, power surges, lightning, pets or other animals, insects and/or their hives or nests, negligence, or acts of God.
  9. Not grounding and/or bonding as specified, mis-wiring, loose wiring, cut or kinked wires, loose cable connections, incorrect wire runs, incorrect breaker size, breaker(s) in “off” position, improper wire gauge, moisture in electrical conduit, improper electrical supply, dead batteries, incorrect plumbing, inadequate size of pipe and/or fittings, cross-threading, over-tightening, under-tightening, glue drips or residue, improperly secured covers, improper valve placement or usage, unsynchronized valve actuators, valve actuators in “off” position, improper gas pipe sizing, lack of fuel, inadequate heater vent pipe sizing, programming errors, or removal of in-line filter screens from pool cleaners.
  10. Freezing, corrosion, cracking, overheating, warping, flooding, moisture intrusion or any other condition caused by or related to weather, climate, improper winterization, improper equipment placement, inadequate ventilation, inadequate water circulation, roof run-off, sprinklers, irrigation systems, or lights or other products on or near the pool/spa or pool/spa equipment pad.
  11. Operating the product at water flow rates below minimum, or above maximum, specifications. Operating any product or piece of equipment including, but not limited to, pumps, with insufficient quantities of water.
  12. Improper equipment sizing, or product mis-applications including, but not limited to, unsuitable application of a pool cleaner, or use of residential products on commercial applications.
  13. Dirty, clogged, blocked, covered or obstructed plumbing, cleaner parts, chlorine generator cells or sensors, pump strainer baskets, pump impellers, heater orifices (including blockage by spider webs), heater grills, doors, flue boxes, flue vents or flue collectors, filter elements, or filter breather tubes.
  14. Collateral damage caused by failure of any component including O-rings, pump strainer baskets, DE grids, sand filter laterals, or cartridge elements.

This is the only warranty given by Zodiac. No one is authorized to make any other warranties on behalf of Zodiac. IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE EXPRESS WARRANTIES LISTED ABOVE. Some states and/or provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Zodiac expressly disclaims and excludes any liability for consequential, incidental, indirect, or punitive damages for breach of any expressed or implied warranty. In no event shall Zodiac be liable for incidental or consequential damages of any nature, including damage to vinyl liners, plaster, aggregate-based pool surfaces, tile, stone, coping, fixtures, skimmers or skimmer covers, plumbing, drains, equipment covers or shelters, landscaping, animals, plants, or dwellings. Some states and/or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. Certain vinyl liner patterns are particularly susceptible to rapid surface wear or pattern removal caused by objects coming into contact with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic pool cleaners. Some vinyl liner patterns can be seriously scratched or abraded by rubbing the surface with a pool brush. Ink from the pattern can also rub off during the installation process or when it comes into contact with objects in the pool. Zodiac is not responsible for, and this warranty does not cover, pattern removal, cuts, abrasions or markings on vinyl liners.

This warranty gives you specific legal rights. You may also have other rights that vary by state and/or province. For warranty consideration, contact the original dealer and provide the following information: proof of purchase, model number, serial number, date of retail purchase, and date of installation. The dealer will contact the factory to obtain instructions regarding the claim and to determine the location of the nearest independent service company. If the dealer is not available, you can locate an independent service company in your area by visiting www.zodiacpoolsystems.com or www.polarispool.com, or by emailing our Technical Support Department at productsupport@zodiac.com, or by calling our Technical Support Department at 800-822-7933. In Canada, visit www.zodiacpoolsystems.ca or www.polarispool.ca or call 888-647-4004, or email the Technical Support Department at customerservicePSC@zodiac.com. All returned parts must have a Returned Material Authorization number to be evaluated under the terms of this warranty.

 Adobe Acrobat PDF Zodiac Warranty Policy
 Adobe Acrobat PDF Polaris Warranty Policy
Hay muchas maneras diferentes de contactarnos, y nos gustaría hablar con usted sobre las preguntas de su compra, ayudarle a diagnosticar los problemas de su equipo y escuchar acerca de cómo podemos mejorar y todo lo que está en su mente.
Click Here
5am - 8pm Weekdays
6am - 4pm Weekends
Pacific Standard Time
Will-Call Hours Click Here
Be the first to know the latest news, deals & special events!


Pool Supply Unlimited is an e-commerce company that loves water. We love to pump it, filter it, heat it, chlorinate it, light it up and stare at it while we're barbequing a fat, juicy steak. There are real pool professionals working here. Our guys have seen thousands of pools in their careers, no exaggeration. We are based in Southern California and can land most products to your door (within the 48 contiguous states) in less than a week.
Visa Mastercard Discover American Express PayPal
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams